DevHook Ultimate Installer v1.5.4

[Zero]

I'm releasing both versions at the same time.

Why? Well 1.5.3 uses my method, with the "DevHook Setup.bat" file, and 1.5.4 uses tommydanger's installer.

I had 1.5.3 already made at the time, so instead of simply scraping it, I'll release it as well.

The only difference is 1.5.3 has the 3.01 firmware (it says 2.82, it's a typo), 1.5.4 has the 3.02 firmware, not that it matters.

I am also adding an experimental 333MHz fix. It should allow WiFi at 333MHz.

For 1.5.4, you can choose to install the Audio and WLAN fix by running the "Experimental 333 Fix.bat" file, after you run the firmware installer. For 1.5.3, you have the option to run the "DevHook Setup.bat" by itself, or the "DevHook Setup (Inc. WiFi Fix).bat". Choose one or the other.




:: DevHook Ultimate Installer v1.5.4 ::

Includes:

* Install DevHook 0.51 with 3.02
* Install PSPConv v1.0.1 by ZiNgABuRgA
* Install PSP ISO Compressor v1.4
* Install PSP Content Manager v1.5
* Full Install: DevHook 0.51, PSP ISO Compressor, Content Manager

INSTRUCTIONS
For 1.5.4, run the Ultimate Installer, and run the DevHook installer under your game menu. If you decide to use the 333 fix, plug your PSP back into your computer and run the"Experimental 333 Fix.bat" file.



:: DevHook Ultimate Installer v1.5.3 ::

Includes:

* Install DevHook 0.51 with 3.01
* Install PSPConv v1.0.1 by ZiNgABuRgA
* Install PSP ISO Compressor v1.4
* Install PSP Content Manager v1.5
* Full Install: DevHook 0.51, PSP ISO Compressor, Content Manager

INSTRUCTIONS
1. Run the Ultimate Installer v1.5.3 to put all files on your memory stick.

2. On your PSP, go to your GAME menu. Select PSAR Dumper.

3. When the PSAR Dumper loads, press X.

4. There will be lines of text on your PSP.
The 3.01 firmware is now being put on your PSP's memory stick.

5. When the dumper is complete, turn off your PSP, not just standby, but right off.

6. Turn your PSP on and activate the USB Connection.

7. On your memory card root, you will see a newly created F0 folder.

8. Run the file "DevHook Setup.bat" to run the normal setup, or "DevHook Setup (Inc. WiFi Fix).bat" to run the setup plus 333MHz WiFi fix.

9. After the confirmation that the setup is complete, disconnect the USB and go to your GAME menu. Launch DevHook 0.50.

It is still unclear if the next instructions, 10 to 12, are required or optional. I say try without first, then do it after you have entered the XMB and set up all your options.

10. Go to the “FLASH ROM” menu.

11: If you flashed the DevHook files from DevHook 0.46, remove those first.

12: Choose “flash1: < ms0: install configfile". Press circle.

13: Choose firmware 3.01 in the “FIRMWARE” menu and press “START”

14: When you enter DevHook, A blue screen will appear saying your setting are corrupt. Press O to solve this.





:: Downloads ::

Download DevHook Ultimate Installer v1.5.4 for 1.50 Users

Download DevHook Ultimate Installer v1.5.4 for SE Users

<v1.5.3 links pulled>

DevHook Ultimate Installer 1.5.1 Advanced

DevHook Ultimate Installer 1.5.1 for SE Users

DevHook Ultimate Installer v1.5.1 Torrent

[philippecr]

haha! Way to go! Chaos Zero!

and BOOSTER RULEZ! he's the best! and hope 3.00/3.01 emulation will come! hail Booster!

[avirpatel]

i am sorry for what i said before, i was type of annoyed coz you allways make the installers and give no-one elese a chance. I was abit stupid before and i can see that alot of work has gone into it. Sorry

[noemtfj]

the psp auto turn off when i load PSAR Dumper V2B, nothing appears, no F0 folder found.

any mistake???

[fhqwgad]

Crimsonscyes, the reboot.bin is copied in the wrong directory just copy it to the 282 folder

i posted this on psp-haxorz.com

[Crimsonscyes]

Where was reboot.bin copied to? The only reboot.bin I see is in dh\282\f0\reboot.bin but I think that's where its supposed to be.

EDIT:
Nevermind I was able to get it past the blue screen after adding a Flash1 file (f1). The 1.5.1 installer fixes that problem. Thanks Chaos Zero! :D

[noemtfj]

I don't know what happened with my Ultimate Installer [16.8Mb] but it even haven't create the 282 folder

[ahmed]

the blue screen come n im preasing 0 bt its not going can u help me with it

[cookies]

sigh.. must we really flash the psp in order for it to work?

dont really like the idea of flashing:(

[lickitpsp31]

sigh.. must we really flash the psp in order for it to work?

dont really like the idea of flashing:(

i feel wat u sayin i dont fancy flashing me psp