Results 1 to 2 of 2

Thread: Samsung-Toshiba DVD Drive

  
  1. #1
    HypeH^ is offline -Hacks Newbie
    Join Date
    Oct 2010
    Posts
    1
    Rep Power
    0

    Default

    Hi guys,

    I have a Samsung-Toshiba MS-28 Drive in my 360.

    I have a couple of problems... When standing the console up the drive doesnt eject.. but it does when it lays down.

    I have attempted to take it out of the console to replace it but i accidently broke the Sata port when taking the cable out... and the little ¬ shaped part inside the SATA connection of the drive snapped out and is in the end of the sata cable...

    since this, when i attempt to connect the drive to the pc to flash it or get the DVD key from it I cant as a sata cable wont connect to the socket...

    my question is.. if i buy a replacement drive and then swap the PCB from my existing drive and put it into the new drive will it work straight off the bat? am i correct in thinking the DVD key is stored within the chip on the PCB? so the drive should just instantly work if i swap them around?

    obviously I have to buy the Exact same model drive...

    Many thanks in advance,
    HypeH^


  2. #2
    ERIFNOMI is offline oops -Hacks Titan
    Join Date
    Apr 2007
    Posts
    4,384
    Rep Power
    0

    Default

    Yes as long as the drives are the same model. And of course the SATA port isn't on the board. It's been a while since I've seen an xbox drive so I can't remember.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •